MON-SAT: 7:30 AM - 9:00 PM
SUN: 8:00 AM - 8:00 PM
MAP & HOURS

King Kutter

Showing1-15 of 18 items
King Kutter 16-8-CDF ATV Flip Over Disc

King Kutter 16-8-CDF ATV Flip Over Disc

Price: $679

KING KUTTER'S FLIP OVER DISC is designed for the toughest applications. It features a full 3" square tube frame that can be weighted, the disc has 1" square axles, 16" notched blades and maintenance free sealed bearings. A full 4-foot cutting width with 20 degrees cutting angle and an adjustable height tongue for various sizes of 4-wheelers or small tractors. It also has a rear receiver hitch (ball hitch not included) so you can pull an ATV Seeder/Spreader or Drag Harrow for maximum effiency

Stock #: 16-8-CDF
King Kutter TG-48 4' Tiller 3-pt Implement

King Kutter TG-48 4' Tiller 3-pt Implement

Price: $1,399

KING KUTTER II's GEAR DRIVEN ROTARY TILLERS are designed to perform with its heavy duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping, or other jobs. This Category 1 tiller includes a PTO shaft with heavy duty slip clutch. Designed for tractors for 20 to 35 horse power.

Stock #: TG-48
King Kutter TRB-60-XB 5' Compact Tractor Rear Blade 3-pt Implement

King Kutter TRB-60-XB 5' Compact Tractor Rear Blade 3-pt Implement

Price: $289

KING KUTTER'S XB REAR BLADE is designed for value added performance. Uses include road grading and maintenance, landscaping, snow removal, cleaning livestock pens, and much, much more. The XB Series rear blades feature a special formed 10" high 1/4" thick moldboard designed to roll dirt or snow and prevent drag. Each moldboard is equipped with high carbon steel reversible cutting edge that adds to the life of the blade. It features a unique, reinforced, 3-point square tube frame for added strength. Each unit has 5 forward and 5 reverse settings for maximum efficiency

Stock #: TRB-60-XB
King Kutter S-500 Steel Seeder/Spreader 3-pt Implement

King Kutter S-500 Steel Seeder/Spreader 3-pt Implement

Price: $429

KING KUTTER'S SEEDER\SPREADER gives new meaning to the word adaptable. With this one tool you can spread seed, granular fertilizer, crystalline herbicides, pesticides and sand. Plus you can choose from three different spreading patterns; predominately left, predominately right, or left and right. The seamless all steel seeder\spreader is strong enough to endure rough handling and heavy use. The heat treated paint resists corrosion caused by chemicals and moisture. Each unit comes standard with a rotating agitator and gearbox with shielded drive line.

Stock #: S-500
King Kutter TG-48-XB 4' Compact Tractor 3-pt Tiller

King Kutter TG-48-XB 4' Compact Tractor 3-pt Tiller

Price: $1,399

KING KUTTER'S XB-TILLER is a quality constructed tiller that is built to last. The adjustable skid shoes control the cutting depth while the rear shield controls the soil mix. Each tiller is equipped with a slip clutch to protect the cast iron gear driven center gear box and the gear driven side gear box. This unit has a 48" cutting width and is designed for sub-compact tractors up to 25 HP

Stock #: TG-48-XB
King Kutter 14-10-CD ATV Compact Disc

King Kutter 14-10-CD ATV Compact Disc

Price: $649

KING KUTTER'S COMPACT DISC has many features found only on the larger models. Strong square tube frame, 1" high carbon steel axles, maintenance free sealed steel bearings, 14' notched disc blades, and a unique pull tongue design that allows down pressure to be applied without the need for weights. The wheeled design is engineered for smooth transition from off-road transport to cutting position with just the turn of a crank. The 33" cutting width allows for easy transport to hard to reach areas and small patches of ground. Perfect for deep woods, wildlife food plots, small gardens, row cultivation, and yard prep work. This compact disc is easily pulled by 4-wheelers, garden tractors, and sub-compact tractors using a 1-7/8" ball

Stock #: 14-10-CD
King Kutter PRB-84 3-pt 7' Professional Rear Blade

King Kutter PRB-84 3-pt 7' Professional Rear Blade

Price: $499

PROFESSIONAL 7' REAR BLADE KING KUTTER'S PROFESSIONAL PRB SERIES REAR BLADES are designed for dependable performance on tough jobs. They are great for dirt work, road maintenance, and ditching, landscaping, snow removal, cleaning livestock pens plus much more. The PRB Series features a specially molded moldboard, with reinforced back bracing for extra strength and performance. All moldboards are equipped with a reversible, high carbon, heat-treated steel edge. The PRB has 7 forward and 5 reverse settings, plus they will tilt left or right and off set.

Stock #: PRB-84
King Kutter TRB-72 3-pt 6' Rear Blade

King Kutter TRB-72 3-pt 6' Rear Blade

Price: $289

KING KUTTER'S REAR BLADES are designed for value added performance. Uses include road grading and maintenance, landscaping, snow removal, cleaning livestock pens and much more. They are constructed of durable 1/4" thick by 14" high moldboard specially formed to roll dirt and prevent drag. The cutting edge is made of high carbon steel and is sharpened on both edges for double use. These rear blades feature a unique, reinforced, 3-Point wrap around frame for added strength. Each unit has five forward and five reverse angular adjustments for maximum efficiency. Width: 6' Hitch Category: Cat. 1 quick hitch compatible Adjustments: 5 Front and 5 Rear angle settings

Stock #: TRB-72
King Kutter MB Middle Buster 3-pt Implement

King Kutter MB Middle Buster 3-pt Implement

Price: $149

MIDDLE BUSTER KING KUTTER'S MIDDLE BUSTER combines strength and durability to offer a tool with many uses.The middle buster is great for laying off rows, digging potatoes, pointing a ditch, general field preparation and many other farm, field and garden uses.

Stock #: MB
King Kutter 18-20-G-CBF 3-pt 6.5' Angle Disc/Blade

King Kutter 18-20-G-CBF 3-pt 6.5' Angle Disc/Blade

Price: $1,289

6 1/2' 20-18" BLADE DISC COMB. KING KUTTER'S PROFESSIONAL ANGLE FRAME DISCS are constructed with heavy rigid angle iron. It connects easily to any three-point hitch with category one specifications. The disc gang axles are made of 1" square steel rods mounted on double thrust ring gray-iron bearings. All disc harrows have angle adjustments of 10 or 15 degrees. The 5 1/2' discs have two adjustments and the 6 1/2' has three.

Stock #: 18-20-G-CBF
King Kutter 16-20-G-SB-C 6.5' Angle Disc/Blade

King Kutter 16-20-G-SB-C 6.5' Angle Disc/Blade

Price: $789

6 1/2' (working width) 20-16" BLADE DISC COMBO KING KUTTER'S ANGLE FRAME DISC HARROWS are constructed with heavy rigid angle iron. It connects easily to any three-point hitch with category one specifications. The disc gang axles are made of 1" square steel rods mounted on double thrust ring gray-iron bearings. All disc harrows have angle adjustments of 10 or 15 degrees. The 5 1/2' discs have two adjustments and the 6 1/2' has three.

Stock #: 16-20-G-SB-C
King Kutter DS-30 30" 3-pt Dirt Scoop

King Kutter DS-30 30" 3-pt Dirt Scoop

Price: $359

DIRT SCOOP 30" KING KUTTER'S DIRT SCOOP fits a standard three-point hitch tractor. Adjustments in the pitch for digging are made at the top link. It features a uniquely designed heavy duty angle iron frame. The reversible mounting allows you to attach your tractor to the front or the rear of the scoop, enabling it to work forward as a slip scraper or in reverse as a shovel. This versatile dirt scoop also has a self closing pan with a beveled cutting edge. The dirt scoop digs, carries, dumps and spreads in forward and reverse.

Stock #: DS-30
King Kutter CV-G-1-C 54" 3-pt Cultivator

King Kutter CV-G-1-C 54" 3-pt Cultivator

Price: $119

ONE ROW "C" TINE CULTIVATOR KING KUTTER'S ONE ROW "C" TINE CULTIVATOR is made of heavy-duty welded angle iron construction with maximum ground clearance and mounted up close to give better control. It comes standard with high quality spring steel "C" tines with reversible heat-treated points.

Stock #: CV-G-1-C
King Kutter CA Carry All 3-pt Implement

King Kutter CA Carry All 3-pt Implement

Price: $139

CARRY ALL KING KUTTER'S CARRY ALL is a versatile tool with hundreds of uses. The frame is made of heavy duty angle iron with pre-punched holes which readily accept plywood or plank lumber to create a working platform. With a lift capacity of 1,000 lbs., it makes a great tool to carry feed, rocks, wood, and fencing supplies, plus much, much more.

Stock #: CA
Showing1-15 of 18 items

Get a Quote

Please enter your contact information and one of our representatives will get back to you with more information.