MON-SAT: 7:30 AM - 9:00 PM
SUN: 8:00 AM - 8:00 PM
MAP & HOURS

PolyDome

Showing1-8 of 8 items
  • Page:
  • 1
PolyDome Square Big Foot Calf Hut

PolyDome Square Big Foot Calf Hut

Price: $479

POLY SQUARE BIG FOOT The Big Foot has all the features of the Poly Square, but it is 12″ longer (7'6′), and comes standard with the rear vent system. The Big Foot will give you superb growth and healthier lung power needed for proper development into higher producing herds. As stated in Country Folks, May 8, 1989 by Dr. Howard Larsen, Professor Emeritus Dairy Science Department, University of Wisconsin - "Properly designed, the calf hutch can be an excellent management tool which allows the calf to be comfortable, disease free, and grow to her genetic capacity. Calves will then thrive, not merely survive, and become long-lived, healthy productive animals in the herd." The Poly Square Big Foot is constructed of opaque material to eliminate the solar effect. It blocks out the sun's heat-not sunlight. The Big Foot's inverted ribs and 5'(w) x 7'6"(l) stance make it extremely wind resistant-with the largest footprint of any unit on the market today. And like the Poly Square it has no pop rivets which means no breaks or cracks for snow and rain to sift in. The Poly Square Big Foot has the biggest sleeping area of any calf hutch on the market today (38 square feet). NOTE: The left side feeder is standard. Right side, and rear feed configurations are available. White opaque material to knock out sun heat Made from high-impact UV stabilized polyethylene 5′ Wide x 7′-6″ long Weighs approximately 100 pounds Stackable Easy cleaning Easy access bottle holder Bucket holder with 2 - 5-quart buckets Fence brackets Rear vent Center flow adjustable vent

Stock #: PD-1010
PolyDome Square Calf Hut

PolyDome Square Calf Hut

Price: $419

POLY SQAURE SHELL & VENT The Poly Square Shell only is often used for raising animals other than Calf's, it works very well for goats, sheep. Ducks, miniature houses and so on. White opaque material to knock out sun heat Made from high-impact UV stabilized polyethylene 5' Wide x 6'6" long x 60" high Weighs approximately 100 pounds Stackable Easy cleaning Center flow adjustable vent

Stock #: PD-1015
PolyDome Dome Calf Hut

PolyDome Dome Calf Hut

Price: $349

POLYDOME CALF HUT 86"x60" tall Raising calves is no easy chore! But dairy herdsmen everywhere have discovered the benefits of raising their calves in Poly Dome Calf Nurseries. In fact, Poly Dome is the first choice of dairy farmers throughout the United States and Canada. After comparing Poly Dome Calf Nurseries with modified wooden hutches, the University of Minnesota-Morris found that Poly Dome calves were healthier and grew faster than calves kept in wooden huts. And Poly Dome testing at several other universities is yielding similar results. Poly Dome will help put money back into your pocket faster. Why risk burnt lungs, frozen ears and tails? Poly Dome will help eliminate ammonia build-up. Your heifers will be part of your moneymaking milking herd sooner. You'll notice a difference when you use the original Poly Dome. Your calves will show superb growth and Lung Power® necessary to become high producers. Here's how Poly Dome works: During the day, the bed pack absorbs sunlight. This stored heat keeps your calves warm at night. Unlike open huts, temperature change is controlled over a longer time to reduce stress on your calves. It's perfect even in variable climates. Poly Dome stops snow and wind penetration-helps prevent frozen ears and tails. In fact, after years of farm testing, Poly Dome is still considered the warmest winter hut on the market. Use your Poly Dome throughout the year with an eight-inch bedding. Open the unit and use outside pens in July and August to prevent heat problems. Keep the calves closed-in September through June. By keeping your calves inside, they stay dryer and cleaner. No snow to shovel out, no mud tracked in. No more re-bedding after snow and rain. Made from high-impact UV stabilized polyethylene 86" Diameter x 60" high Weighs approximately 100 pounds Stackable Easy cleaning Easy access bottle holder Bucket holder with 2 5-quart buckets 2 Rods-One rod to hold bucket holder in place, one to hold calf inside Center adjustable flow vent

Stock #: PD-1009
PolyDome Calf Warmer w/ 2-Speed Heater

PolyDome Calf Warmer w/ 2-Speed Heater

Price: $579

CALF WARMER The PolyDome Calf Warmer provides a comfortable environment for newborn calves for the first few hours after birth. The top section is hinged, and removable, for calf entry. The floor is raised and slotted for easy heat circulation of the entire unit. There is a vent/peep hole on one end for proper ventilation and viewing the calf without opening the unit. The bottom is ribbed, and the front rounded, for easy transportation. The front is molded to accept an optional steel hitch for towing. The PolyDome Calf Warmer comes complete with a deluxe, highperformance, 110 volt heater. The heater has 3 heat settings and 2 fan settings for proper regulation under most temperature conditions. The entire unit is made of medium density polyethylene for long-lasting durability and easy cleaning. Made from durable,medium density polyethylene 24″ Wide x 50″ long x 45″ tall; lower section 16″ deep Removable top section Easy cleaning Raised, slotted floor Stainless steel support system Ribbed bottom Vent/Peep hole Deluxe, high-performance, 110 volt, 2-speed heater

Stock #: PD-6536
PolyDome 8.5 Ton Bulk Bin

PolyDome 8.5 Ton Bulk Bin

Price: $2,799

POLYDOME BULK BINS PolyDome Bulk Bins are the perfect choice for handling high-moisture corn, soybeans, and other granular materials. They are made of highdensity polyethylene which will never rust or corrode. PolyDome Bulk Bins will always remain clean and attractive. The interior surface of PolyDome Bulk Bins is very smooth to reduce bridging. Plus, since they are just 2- piece construction there are no rivets and grain-clogging seams to contend with. The translucent polyethylene allows you to visually check material line from the outside. All PolyDome Bulk Bins have a 22″ top opening with a hinged, vented filler cap and a pull rope that allows ground control for filling. All PolyDome Bulk Bins have a 16" hole in the bottom cone. The .8 ton bin has 38″ of ground clearance to the slide valve. The 1.5, 2.5, and 3.5 ton bins have 15″ ground clearance under the slide valves. The 4.5, 6.5, and 8.5 ton bins have 14″ ground clearance under the 90° slide valve; and 11″ ground clearance under the 30° slide. PolyDome Bulk Bins feature heavyduty support frames with extra large secure plates for more holding power. They have flat strap cross bracing for increased stability. The .5 - 3.5 ton units come standard with 4 legs; the 4.5 thru 8.5 ton units have 6 legs. The legs have large support tabs which can be bolted to concrete for added stability especially on the larger units. All PolyDome Bulk Bins have a sturdy ladder with slip guard. It is braced securely to the top of the tank near the filler cap. All assembly hardware is supplied. Erection time is one-third of steel bins. Time is money! Frames have a baked-on polyester powder coat finish which resists corrosion. FINANCE FOR ONLY $73/month!* *5.99%APR for 48 months, $0 down required, financing on approved credit.

Stock #: PD-1200
PolyDome 4.5 Ton Bulk Bin

PolyDome 4.5 Ton Bulk Bin

Price: $2,199

POLYDOME BULK BINS PolyDome Bulk Bins are the perfect choice for handling high-moisture corn, soybeans, and other granular materials. They are made of highdensity polyethylene which will never rust or corrode. PolyDome Bulk Bins will always remain clean and attractive. The interior surface of PolyDome Bulk Bins is very smooth to reduce bridging. Plus, since they are just 2- piece construction there are no rivets and grain-clogging seams to contend with. The translucent polyethylene allows you to visually check material line from the outside. All PolyDome Bulk Bins have a 22″ top opening with a hinged, vented filler cap and a pull rope that allows ground control for filling. All PolyDome Bulk Bins have a 16" hole in the bottom cone. The .8 ton bin has 38″ of ground clearance to the slide valve. The 1.5, 2.5, and 3.5 ton bins have 15″ ground clearance under the slide valves. The 4.5, 6.5, and 8.5 ton bins have 14″ ground clearance under the 90° slide valve; and 11″ ground clearance under the 30° slide. PolyDome Bulk Bins feature heavyduty support frames with extra large secure plates for more holding power. They have flat strap cross bracing for increased stability. The .5 - 3.5 ton units come standard with 4 legs; the 4.5 thru 8.5 ton units have 6 legs. The legs have large support tabs which can be bolted to concrete for added stability especially on the larger units. All PolyDome Bulk Bins have a sturdy ladder with slip guard. It is braced securely to the top of the tank near the filler cap. All assembly hardware is supplied. Erection time is one-third of steel bins. Time is money! Frames have a baked-on polyester powder coat finish which resists corrosion. FINANCE FOR ONLY $58/month!* *5.99%APR for 48 months, $0 down required, financing on approved credit.

Stock #: PD-1220
PolyDome 3.5 Ton Bulk Bin

PolyDome 3.5 Ton Bulk Bin

Price: $1,799

POLYDOME BULK BINS PolyDome Bulk Bins are the perfect choice for handling high-moisture corn, soybeans, and other granular materials. They are made of highdensity polyethylene which will never rust or corrode. PolyDome Bulk Bins will always remain clean and attractive. The interior surface of PolyDome Bulk Bins is very smooth to reduce bridging. Plus, since they are just 2- piece construction there are no rivets and grain-clogging seams to contend with. The translucent polyethylene allows you to visually check material line from the outside. All PolyDome Bulk Bins have a 22″ top opening with a hinged, vented filler cap and a pull rope that allows ground control for filling. All PolyDome Bulk Bins have a 16" hole in the bottom cone. The .8 ton bin has 38″ of ground clearance to the slide valve. The 1.5, 2.5, and 3.5 ton bins have 15″ ground clearance under the slide valves. The 4.5, 6.5, and 8.5 ton bins have 14″ ground clearance under the 90° slide valve; and 11″ ground clearance under the 30° slide. PolyDome Bulk Bins feature heavyduty support frames with extra large secure plates for more holding power. They have flat strap cross bracing for increased stability. The .5 - 3.5 ton units come standard with 4 legs; the 4.5 thru 8.5 ton units have 6 legs. The legs have large support tabs which can be bolted to concrete for added stability especially on the larger units. All PolyDome Bulk Bins have a sturdy ladder with slip guard. It is braced securely to the top of the tank near the filler cap. All assembly hardware is supplied. Erection time is one-third of steel bins. Time is money! Frames have a baked-on polyester powder coat finish which resists corrosion. FINANCE FOR ONLY $48/month!* *5.99%APR for 48 months, $0 down required, financing on approved credit.

Stock #: PD-1230
Showing1-8 of 8 items
  • Page:
  • 1

Get a Quote

Please enter your contact information and one of our representatives will get back to you with more information.